-
Anonymous users2024-01-23Due to the characteristics of solid wood doors and solid wood composite doors, when buying wooden doors, the owner can check the appearance quality of the wooden door according to the process adopted by the wooden door to avoid buying defective products. So what are the possible flaws in them? According to Obolon Wooden Door Company, the surface of solid wood doors and solid wood composite doors is wood or decorative veneer, the difference is that solid wood doors are directly painted on wood or not painted, while solid wood composite doors are painted on decorative veneer.
According to the manufacturing process of these two types of doors, their appearance quality defects include two parts: one is the defect of wood or thin wood (solid wood composite façade layer) itself, and the other is the defect of paint, which is mainly manifested in the following aspects.
Cracks: There are two types of cracks: longitudinal cracks and annular cracks. The longitudinal crack trend penetrates the wood grain and gradually extends; Ring cracks are mostly generated between wood grains and generally do not extend.
Insect eye: that is, the piercing eye left after being eaten by insects. After the wood is artificially dried, the moths have died, and the moths will not develop again, but the presence of insect eyes will affect the appearance.
Texture: The texture of good wood is a regular grain, such as a chaotic or inverted wooden door with a low grade.
Decay: Wood tissue necrosis, mildew, discoloration, resulting in loose texture and reduced strength.
Adhesive penetration: After the veneer is hot-pressed and glued, the adhesive leaks out of the outer surface of the veneer from the pores of the veneer to form a glue spot, and its adverse effect is mainly to make the surface of the workpiece may produce spots after painting.
Bubbling: Bubbling is the bulging and bubbles of the veneer after gluing, and its repair process is troublesome, which greatly affects the production efficiency.
Cracking: It refers to the gap on the surface of the veneer that is larger than after pasting, which often appears in the deformation of the veneer or the splicing, which is also the most common defect in the veneer pasting process.
Lack of adhesive: refers to the local lack of adhesive or discontinuity between the substrate and the veneer after hot pressing, which is mainly caused by uneven gluing or low adhesive viscosity.
Before identifying solid wood composite doors, we must first understand the concept of solid wood composite doors. The core of the solid wood composite door is mostly made of pine, fir or imported filling materials, etc., and the MDF and solid wood veneer are pasted on the outside, which are made after high temperature hot pressing, and the edges are sealed with solid wood lines. >>>More
I think feel is very important. When looking at the sample, open and close it a few times, and try the feel of opening and closing the door. A good door opening and closing feels very smooth, fluent, and feels natural.
Now there are a lot of solid wood composite doors on the market, and the prices are different, but consumers often do not know how to measure the quality of wooden doors. >>>More
Yimeida Door Industry will answer for you.
Solid wood composite lacquered door is a general term, and it includes many types. Such as: solid wood composite paint door, solid wood composite door, composite door, molded door, double package door, etc. >>>More
Solid wood composite door has veneer, wood grain paper, the price is not the same material, there are hollow and solid, so when you buy can not only listen to the price and not look at the quality, Handan County Guandong wood products factory solid wood composite door OK, my home is the door of Guandong, very good, you can try.