-
Anonymous users2024-01-23What you are talking about is the plastic steel bar buckle ceiling, the last piece of width will take the width of the space, more than 1 cm in length, the length of the wall to the other corner of the line, less than 1 cm, in the installation of the first side of the buckle plate to the corner line, in the left and right move to meet the length of the left and right corner line, in the side of the good buckle plate to shoot over, OK, it is best to pull it on the second to the bottom of the mother.
-
Anonymous users2024-01-22The installation tips for the last piece of the balcony gusset are as follows:
The gusset has edge corner strips, and the length of the last gusset is the clearance size of the corner strip to the corner strip plus the depth of one corner strip; The width is also the headroom size plus the depth of the corner bar. When installing, first stuff the gusset into the corner strip, and then pull it out some, as long as both sides can be rested. The gusset in the width direction should first ensure that the combination of the gusset and the gusset is normal, and then it is no problem to empty the corner strip.
Gusset, a material commonly used in interior decoration, is named according to the decoration construction process, and is installed on the ceiling and wall.
Gusset is a decorative material. Because it can be directly installed and used for surface decoration, it looks like it is buckled on the surface of building decoration, so it is called "gusset". It is mainly processed and produced by raw materials such as polyvinyl chloride plastic (PVC), iron plate, steel plate, aluminum alloy, stainless steel, etc., which is convenient for construction and installation.
-
Anonymous users2024-01-21The net remaining space (excluding the gusel) is a few millimeters larger, and when installing, push the gusset into the gusset and return it, because there are still a few centimeters in the position of the gusset.
The last gusset of the ceiling ceiling is actually installed first (the second to last), and the last gusset is actually installed is the penultimate gusset. >>>More
Draw a line along the perimeter of the wall, punch the wooden needle under the electric hammer (including the wooden keel and the wooden needle fixed with the yin angle line), fix the keel around it, and nail the keel in the middle according to the width of the gusset to ensure that the gusset socket is well fixed with the keel. The four corners are also fixed. The last piece is narrower and can be thrown in.
It is estimated that it is a meter by 1 meter, and the ordinary glass used is on the line, generally about 28 yuan per square meter. It's 42 yuan, if you put it back by yourself, the original leather strip must be kept first, and a screwdriver must be prepared at that time.
If it is a polymer composite gusset as a ceiling, because it has the advantages of environmental protection, fire prevention, waterproof, moisture-proof, anti-corrosion, anti-condensation, high strength, diverse shapes, strong three-dimensional sense and long service life, the price is generally 150-300 yuan square, if it is an aluminum gusset and other metal gusset plates, the price ranges from 100-200 yuan square, but the performance is not the same, and the use area is limited.
Elevation of elastic line Install the main keel 62616964757a686964616fe78988e69d8331333365653236 Install the boom Install the side keel Install the plastic gusset Install the site. Draw a line along the perimeter of the wall, punch the wooden needle under the electric hammer (including the wooden keel and the wooden needle fixed with the yin angle line), fix the keel around it, and nail the keel in the middle according to the width of the gusset to ensure that the gusset socket is well fixed with the keel. The four corners are also fixed. >>>More