What can be done if the drain in the kitchen is clogged

Updated on Kitchen 2024-01-27
2 answers
  1. Anonymous users2024-01-23

    Get out the stuff that's blocking the pipe. There are things that are sold in the market that have sewer pipes, I don't remember the specific name, and they are not expensive, they are long and short, and they are easy to use. If you go to a general grocery store, you should buy it.

  2. Anonymous users2024-01-22

    Make a phone call to unblock the pipes, and there are usually small advertisements posted in the corridors.

Related questions
Kitchen drain is clogged
3 answers2024-01-27

1. If it is a garbage blockage, use a professional pipe to dredge it (if you can see the inspection opening, you can also do it yourself). >>>More

What to do if the drain pipe in the home bathroom is clogged
3 answers2024-01-27

If the drain pipe in the home bathroom is blocked, it is recommended that you go to a local building materials store or supermarket to buy a hand-cranked pipe dredge (about 3 meters long), which is simple to use and costs about 15 yuan. and consult how to use it. See pictures for details

There is a gap seepage at the interface of the PVC drainage pipe on the top of the bathroom, how to
6 answers2024-01-27

Start by identifying where the water is leaking. If it is only a joint leakage, under the premise that the quality of the pipe is qualified, the joint can be replaced or a leak-proof sealing tape and AB sealant can be added to the joint; If the quality of the pipe is not good, the pipe should be replaced. You can also apply the adjusted AB glue in the leaking place, and then wrap a layer of ribbon on it, so that the ribbon is soaked with AB glue and then apply a layer of AB glue on the ribbon, and the whole process can be divided into two or many times.

Can a 110 drain drain drain drain drain drain 12 toilets? 12 bathrooms share one
2 answers2024-01-27

The inlet pipe is 8 minutes to 1 inch, and the drainage pipe is 110.

Kitchen and bathroom drainage pipe expansion joint installation location specification requirements
1 answers2024-01-27

There is no requirement for the location, but it is required to be set within 4M, which is generally set in the riser, and the installation site is generally installed under the tee of the riser.