-
Anonymous users2024-01-23First wipe it with cement grout, then buy some fireproof paint to brush it, and then use waterproof mortar on it to make a final tile paste.
-
Anonymous users2024-01-22Buy a bucket of Oriental Yuhong waterproof adhesive and apply it to the tiles, so that it will not be in the easy water.
-
Anonymous users2024-01-21Use the plugging spirit to plug the gap first, and then brush the waterproof paint.
-
Anonymous users2024-01-20Epoxy plastic grease can be used to seal the leakage joints with high-pressure grouting. It can also be plugged with (water leakage).
Epoxy resin. (Water leak repair) are all waterproof materials.
Epoxy resin is liquid. (water leakage) is powdery.
Water, now there is a finished asphalt coating film, and when it is sunny, it will basically not leak. If there is a waterproof layer, it is more troublesome, to remove the waterproof within the surrounding area, re-do the waterproofing, and pay attention to the original waterproof junction to do a reinforcing layer. >>>More
Repair downstairs to cure the symptoms but not the root cause, or let the upstairs repair, otherwise after a while, you will have to run upstairs in three days.
The formation of cracks in cast-in-situ reinforced concrete floor slabs is affected by many factors such as foundation settlement. When water leaks due to cracks in the ground (or weak concrete), high-pressure grouting from the bottom can be used to plug the leakage. >>>More
Hello, use a special leak plugging waterproof double-sided tape, similar to bubble gum, use a hammer or something to punch in!
If there are cracks in the balcony of the old house, you should find the property or developer to repair it, if you don't know how to repair it, don't mess around, otherwise the balcony cracks will not be repaired.