-
Set up the 2nd router (secondary router):
One end of the network cable is connected to the LAN port of the router, and the other end is connected to the network port of the computer, open a browser, enter the router box or the manual written on the directory) to select the DHCP service, and turn off DHCP
Select the LAN port menu and change the IP address to.
Note: 1) Both.
2) It is different from the IP address of the main router.
3) In the same network segment as the IP address of the main router, for example:
After the setting is complete, one end of the network cable is connected to the LAN port of the main router, and the other end is connected to the LAN port of the secondary routerNote: The WAN port of the secondary router is idle.
-
As long as the IP addresses of the two routers are different, it is fine.
The solution to this problem is very simple, search for wn560n2 repeater on Taobao What is the function of the repeater? 1.It can extend the distance of your home wireless router wifi transmission, for example, the wifi signal coverage of your wireless router is 10 meters, and the place where you need to access the Internet is 20 meters, the object can plug this product into the place where your main router has a signal (such as about 8 meters) and set it up as a wireless relay, you can expand the wifi signal coverage of your wireless sock router to 20 meters away) 2 >>>More
In fact, the wireless router should be placed directly in the middle of the home, so that it can basically cover the entire range. >>>More
No. The router input signal requires a wired network cable.
Are you talking about the effect that the resolution is not right? Click on the Start menu, enter the resolution, and tap Adjust screen resolution,,, where you can adjust the resolution.
Log in to the screen and change your password.
The account and password of the router are generally admin (also available: guest and root). >>>More