What color is good to choose for small overall kitchen cabinets

This also depends on the overall decoration style of your home, this element is more, decoration style, wall tiles, floor tiles, and styles should be seen, not just a tone. The colors are all good-looking, but how to look good is not an easy task. This depends on the whole, and I can't tell you that the color is good-looking.

This is what my family did in Daxin, you see.

It is good to choose white, silver, and off-white for small overall kitchen cabinets, and light colors make the kitchen look not so small. Let's take a look at how to choose an overall cabinet:

Take a look at the edge banding of the panel.

The edge sealing of high-quality cabinets is delicate, smooth, and feels good, the sealing line is straight and smooth, and the joints are fine. Professional manufacturers use linear edge banding machines to complete edge banding, breaking, trimming, chamfering, polishing and other processes at one time, with uniform gluing and stable pressure to ensure the most accurate size. The workshop-type small factory is to use a brush to apply glue, manually press and paste the edge, use a castor paper knife to trim, and polish with a manual polishing machine, due to the uneven pressure, many places are not firm, and it will also cause formaldehyde and other toxic gases to volatilize into the air.

Second, look at the punch. Today's panel furniture is assembled by three-in-one connectors, and the fit and accuracy of the hole position will affect the structural firmness of the cabinet box. Professional manufacturers use multiple rows of drills to complete a number of holes on the edge and surface of a plate at a time, and these holes are a positioning datum, and the accuracy of the size is guaranteed.

Third, look at the cutting board. Panel cutting is the first process of cabinet production. Large-scale specialized enterprises use electronic cutting saws to input the processing size through the computer, and the size accuracy of the material selection is controlled by the computer, and a number of plates can be processed at one time, the performance of the equipment is stable, and the dimensional accuracy of the plate is very high, the tolerance unit is in microns, and there is no stubble on the edge of the board.

Fourth, look at the door panel. The door panel is the face of the cabinet, and it is as important as the human face. Due to improper treatment of the substrate and surface process, the door panel produced by the small factory is easy to be deformed by moisture.

Fifth, look at the assembly effect of the whole set of cabinets.

Any size error in the production process will be manifested on the door panel, the door panel produced by the professional factory is horizontal and vertical, and the gap between the doors is uniform, while the small factory produces the combined cabinet, the door panel will have uneven door seams and uneven gaps, large and small.

Six look at the slides of the drawer.

Although it is a small detail, it is an important part of the quality of the cabinet. Due to the size error of the hole position and the plate, there is an error in the installation size of the slide rail, resulting in the drawer pulling is not smooth or loose left and right, and it is also necessary to pay attention to whether the drawer gap is uniform.

The above are a few suggestions from me for your reference! The color choice of the cabinet should also take into account the decoration style, I wish you a smooth decoration!

Warm colors. Don't use dark colors, use bright and clean colors.

Try to use white, or other light colors, so that the kitchen does not look small.