What to do if the bathroom leaks water and does not destroy the tiles

In general, as long as the leakage in the bathroom is not a water pipe problem, it can be treated without knocking on the tiles. The last time our family bathroom leakage was not knocked on the tiles to solve, I directly bought a bottle of Shu Yu waterproof kitchen and bathroom special invisible waterproof liquid sprayed in the bathroom between all the tiles between the gaps, dry for a day and then I used the bathroom normally, and then gradually the water leakage became more and more slight, after more than half a month there was no leakage at all, and now it has been almost two years, there is no problem at all.

Tile water seepage can be considered without removing brick waterproofing or other waterproofing solutions, such as the following methods.

Bathroom tile water seepage must first understand what causes water seepage, there are several reasons: first, the waterproofing of the bathroom is not in place; The second is that the water pipe in the wall is broken and leaks; There is also in the rainy weather, due to the humid air, resulting in water on the surface of the tile; After that, the tile gaps are not good, and there is water seepage.

If there is a problem with the waterproof layer, the tiles must be removed, the wall must be hit to the waterproof layer, and it is better to see the inner wall, and then scrape the putty again, re-make the waterproof layer for the wall, and then pave the tiles.

Scope of application: Suitable for waterproof layer breakage - this method is the easiest to operate, but the life is shorter. Basically, it takes three or five years to do a new penetration waterproofing.

Scope of application: Suitable for joint waterproofing damage or sewer pipe rupture - go downstairs to look at his ceiling, if the ceiling is like this, prove that the waterproof layer at the joint is broken.

Scope of application: The waterproof layer is damaged due to the deformation of the building - the cracks in the ceiling can be clearly seen from the downstairs (if the wall is leaking, the gaps can also be seen in the wall). After the floor slab is deformed, the original waterproof layer is pulled by external forces, and gaps will be generated.

It can be repaired, you can use yy1 tile leakage to directly deal with the bathroom leakage of the tiles, because the tile itself will not leak, if the leakage is the tile gap is not dealt with well caused by the bathroom leakage, so you only need to use yy1 tile leakage to deal with the tile gap, it is very simple and convenient, it can be used normally a few hours after treatment, and does not affect the overall aesthetics.