Flush toilet tank size

Updated on Toilet 2024-01-27
10 answers
  1. Anonymous users2024-01-23

    How long has the toilet been bought?

    When buying, the store can tell you whether you can adjust the amount of water, and since your toilet is divided into buttons for urine and urine, it should be able to be adjusted separately.

    If you are not afraid of trouble, change the toilet, save water, and the money for the toilet is enough.

  2. Anonymous users2024-01-22

    1.How the flush toilet tank works.

    2.Water-saving toilets are expensive, and citizens want to unearth them.

    3.Top 5 tips for choosing a satisfactory toilet.

  3. Anonymous users2024-01-21

    The general toilet in the market is basically up to 15L, because his technical problems are not strong enough, otherwise it will not be clean, and the high-quality toilet has achieved an absolute advantage in terms of appearance and workmanship. In the past, the toilet was flushed down by the gravity of the water, and the water-saving flush toilet was flushed down by the gravity of the water, and it was flushed down by the suction, not by the gravity of the water. Therefore, if you choose a small flush toilet water, you will see if there is a suction flush down function, and if so, you will choose a small L to flush clean and save water.

  4. Anonymous users2024-01-20

    Factors such as different places of use of flush toilets, different sizes of users' toilets, and different hobbies of users determine the ever-changing nature of flush toilets.

  5. Anonymous users2024-01-19

    You can buy a bigger one and come back and make some water-saving adjustments. In this way, any problems encountered can be easily solved.

  6. Anonymous users2024-01-18

    A large water tank does not necessarily have a good flushing effect, and my 3L will do it.

  7. Anonymous users2024-01-17

    Just use a ten-L one, it's useless, it's useless, it's small, you can't hold it, you're right, brother.

  8. Anonymous users2024-01-16

    I'm a toilet expert, and I feel good about 13L, 9L, 6L.

  9. Anonymous users2024-01-15

    The small design is more advanced, so the price is more expensive, but the price of this water-saving toilet is really much higher than the ordinary one, so it is not practical.

    Flush toilet small ways to save water.

    Tie a plastic reverse tooth rope to both sides of the shaft end of the float plug of the toilet tank, and reduce the angle of the plug from 80 degrees to 45 degrees, that is, the closing time of the plug and the flushing volume of the toilet can be controlled freely, and the amount of water discharged can be artificially controlled.

    Add a small plastic-plated spring to the flap, which can not only make the flap more sealed, but also control the water consumption.

    Place containers such as cups or cola bottles filled with water in the water tank to reduce the water tank volume and raise the water level of the water tank.

  10. Anonymous users2024-01-14

    Is the price different, and the styling or something.

Related questions
2 answers2024-01-27

You can only use the leather puff to suck, or use a professional dredging spring to dredge, I believe you don't have this thing, if the blockage is not bad, use the leather puff, if it is powerful, find a professional dredge phone in the corridor, call someone to help you, and the ultimate way, is to remove the toilet and then pass, is more troublesome.

6 answers2024-01-27

There are three situations where there will be a small amount of water leakage, 1. The rubber ball valve is broken, the seal is not tight, and there is water leakage, as long as it is replaced. >>>More

3 answers2024-01-27

The method of removing the water inlet switch of the toilet is very simple. The first thing is to turn off the water inlet switch under the toilet tank, then put the water in the toilet tank clean, then remove the snakeskin hose at the water inlet of the water tank, and unscrew the cap from the bottom of the water inlet pipe of the water tank, and you can take the water inlet pipe and accessories out of the water tank. The tool for disassembly can be disassembled with a wrench.

9 answers2024-01-27

The flush toilet consists of the following main parts: inlet pipe, outlet pipe, seepage pipe, water plug (inlet and outlet), float, drain knob and lever, water refill mechanism, water tank, urinal (the urinal has a bend that connects to the water tank). >>>More

1 answers2024-01-27

I don't know where you live, how to say it, the price is a little worse in different regions, tell you the approximate purchase price, the most inferior Henan out of the hundred hanging zero, Tangshan small factory is not much more expensive, a little better two or three hundred yuan can be about the same, porcelain enamel is better. The important thing is that the accessories and covers should be original, and Xiamen is good. Of course, the brand is good, but it's not worth the money. >>>More