How to choose a simple shower room?

1.Shower room selection – data attention.

2.Shop for a shower room – chassis selection.

3.Choose a shower cabin – identify the material.

1. Purchase a recommended shower room.

a. Look at the thickness and load-bearing of the glass. GENERALLY CHOOSE 8MM, THE GLASS IS TOO THICK, THE AREA WILL BE LARGE, AND THE LOAD-BEARING CAPACITY WILL BE POOR.

b. Look at the hardware hinges and beams. When choosing a frameless shower room, it will be safer to choose a glass thickness of 10MM film, and it will be safer if there is an alloy beam on the top of the upper fence, and the other end of the beam is fixed on the walls on both sides.

c. Look at the style. If the space is small, you can choose the corner split type, which is easy to clean up and save space.

d. Look at the material and certificate. You can carefully observe whether there are sand holes, scratches, etc. on the surface of the aluminum alloy material; Whether the tempered glass is transparent, whether there is blistering, knots and other phenomena; Hardware accessories include handles, tie rods, pulleys and bases, etc., and the electroplating layer on the surface is also preferably high finish, no blistering and anti-corrosion; In the production process, the seams between aluminum and tempered glass, the fit and tightness of the tempered glass door and the waterproof glue, as well as the material of the guide rail pulley and the tightness of the wheel seat can be observed; Industry insiders said that the qualified shower room aluminum, the hardness should be at least 12 degrees or more, the thickness should be at least above, and the hanging glass aluminum on the rail should be above, usually the hardness of the aluminum can be tested by hand pressing the aluminum frame, and the pull-ups can also be done on the aluminum of the shower room to test the strength of the aluminum and the overall firmness of the shower room. It can be focused on checking whether there is a 3C certification mark, product quality inspection certificate and patent certificate on the original tempered glass, among which 3C certification is the abbreviation of China Compulsory Product Certification.

e. Look at the pull rod and pulley. If you buy a shower room with a sliding door, you can test whether the pulley is smooth when pulling, whether the pulley and the aluminum track are tightly matched, whether it is easy to fall off when hit by external forces, etc., whether water vapor is easy to enter the wheel, etc.; Secondly, it is recommended that the pull rod of the shower room should choose a ring pull rod, a straight pull rod, an oblique pull rod, etc. with strong stability.

2. References.

Nan En bath senior experts teach you how to recognize tempered glass.

When buying a shower room, the choice of brand is important.

There are many brands in the bathroom market now, and how to choose is very important for consumers, so it is necessary to understand the production process of glass.

The tempering process of glass tempering is to set the time of about 190 seconds with a computer, and the temperature is between 700 and 1500 degrees. Then the glass is brought into the tempering furnace through the automatic device, and the glass begins to heat up sharply as soon as it enters the tempering furnace, and after reaching the desired temperature, it begins to cool down sharply, and the glass is tempered by a cold and a hot one.

To produce good quality tempered glass, the raw glass should be imported from the large glass factory to ensure the transparency and quality of the glass, and secondly, it should be refined with a good tempering furnace, and the Finnish furnace is better in the market. The advantage of the Finnish furnace is that it adopts a computer numerical control heat dissipation device, and the tempered glass surface is tightly finished.

The industry standard for the self-explosion rate of glass is 2/1000, while the self-explosion rate of the glass after using the original glass sheet and the tempered glass of the Finnish furnace is far lower than the industry standard, only 1/100,000. The original glass of Nan'n shower room is made of original Taiwan glass, A-grade architectural glass. Class A glass has few impurities, strong transparency, will not be blurred more and more, and the self-explosion rate is also low.

Grades B and C have this disadvantage. Tempered by Finnish furnace, the surface is smooth and not deformed, with high impact strength, which can withstand 200KG, in line with international standards.