Can the toilet position be moved in the bathroom of the new house?

Bathroom renovation should confirm the location of each sewer pipe before purchasing bathroom products.

Loved the décor style of the bathroom.

If the bathroom floor is a settlement design, then the displacement of the toilet position can not only be displaced, but also more convenient to operate, with a section of sewage pipe and two 45° elbows can be realized. If it is not a settlement design, then the elevation of the bathroom floor can only be raised, and generally it needs to be raised by at least 20 cm, otherwise there will be a problem with the drainage of the sewage pipe. In this regard, you should first consult the property, and then have an appropriate amount with the plumber master.

Usually, the sewer pipe of the washbasin cannot be used for toilet drainage, because the diameter of the drain pipe of the washbasin is insufficient, but it is completely possible to move the position of the washbasin from the inside to the outside.

The new house is renovated, and the toilet position in the bathroom can be moved.

1. To move farther, the floor of the toilet must be raised and a water trap must be added while moving the pipe, which is used to prevent odor from backflowing. SINCE THE DIAMETER OF THE DRAINAGE PIPE IS GENERALLY 110MM, THE GROUND SHOULD BE RAISED BY AT LEAST 120MM TO LEAVE SOME ROOM FOR THE CEMENT MORTAR AND THE SLOPE OF THE SEWER PIPE.

2. In addition to considering the blockage problem when the toilet is displaced, we must also pay attention to the tightness of the pipe. This is a repeated reminder from experts to the owners, especially the interface between different pipes, to check whether there are leaks many times, to ensure that there is no leakage, sealing rings, glass glue and so on.

3. A few sewer pipes in the bathroom, don't move if you can! To alter the toilet. The projects he has done are usually to change the toilet bowl by about 10 centimeters, using a special toilet shifter (shaped like two staggered elbows).

Since the movement is not very large, it is unlikely that a blockage will occur. If you want to move a little farther, there is no shift you can use, you can only do it on the sewer pipe. Normally, he says, they don't do this because the elbow junction is more difficult to handle.

Decoration Foreman Da Cui explained the analysis of the method of toilet displacement, and today mainly explained the displacement method of the hidden water tank.

In fact, it is still Bai who recommends not moving the du of the toilet

location. If the toilet is displaced, the first thing is clogged.

The internal problems must be considered in advance, and attention should also be paid to the tightness of the pipeline. People who decorate these things will remind the owner again and again. Especially the interface between different pipelines, it must be checked many times, and there must be no leakage or leakage.

And a few of the drains in the bathroom should not be moved if they can be moved.

Change the position of the toiletYou have to change the pipeline, and it is not troublesome to connect the pipelineIt's not easy to block, and it's inconvenient to do it!

There are two types of two-way cases; First, if the position of the movement is not too far from the original pipe (within 1 meter).You can use 750PVC sewer pipe to connect to the original pipe with a ground slot, and make the trough waterproof after slotting! Pipe joints are sealed with styrofoam and filled with cement and then waterproof!

The bathroom floor of the new house is relatively low. There is also a 4 cm amount of sticking to the ground, and the slotting will not be too deep!

The second plan: it requires downstairs cooperation (suitable for long-distance movement).Open the ground with a round eye of 110!

The 110pvc pipe can be connected to the sewer pipe downstairs and block the original pipe for waterproofing! There is also a toilet shifter that can move about 20 cm! Practice has proven that it is easy to block!

If the ground is a settlement design, then the DAO displacement of the position of the horse bucket can not only be operated, but also operated.

It is also more convenient, and it can be achieved with a section of sewage pipe and two 45° elbows. If it is not a settlement design, then the elevation of the bathroom floor can only be raised, and generally it needs to be raised by at least 20 cm, otherwise there will be a problem with the drainage of the sewage pipe. In this regard, you should first consult the property, and then have an appropriate amount with the plumber master.

Usually, the sewer pipe of the washbasin cannot be used for toilet drainage, because the diameter of the drain pipe of the washbasin is insufficient, but it is completely possible to move the position of the washbasin from the inside to the outside.

Yes, if you don't feel the right fit, you can ask them to help you move and change positions.

Generally, it is okay, now the new houses have settlement, and you can find workers to dig deep to modify it.

If not, you can raise the ground by 18CM or change it.

The washbasin is moved outward, and the shower room is made in situ, and the toilet position is not moved, and there will be big trouble if it is not done.

1. To move farther, the floor of the toilet must be raised and a water trap must be added while moving the pipe, which is used to prevent odor from backflowing. SINCE THE DIAMETER OF THE DRAINAGE PIPE IS GENERALLY 110MM, THE GROUND SHOULD BE RAISED BY AT LEAST 120MM TO LEAVE SOME ROOM FOR THE CEMENT MORTAR AND THE SLOPE OF THE SEWER PIPE.

2. In addition to considering the blockage problem when the toilet is displaced, we must also pay attention to the tightness of the pipe. This is a repeated reminder from experts to the owners, especially the interface between different pipes, to check whether there are leaks many times, to ensure that there is no leakage, sealing rings, glass glue and so on.

3. A few sewer pipes in the bathroom, don't move if you can! To alter the toilet. The projects he has done are usually to change the toilet bowl by about 10 centimeters, using a special toilet shifter (shaped like two staggered elbows).

Since the movement is not very large, it is unlikely that a blockage will occur. If you want to move a little farther, there is no shift you can use, you can only do it on the sewer pipe. Normally, he says, they don't do this because the elbow junction is more difficult to handle.