Is it better to make MDF or solid wood particle board in the wardrobe

Advantages of MDF:

One. The material is relatively fine, and the edge of the cutting surface will be sealed well, so that it is not easy to open the glue.

Two. It is easy to press into various shapes and make shapes, so there are usually more door panels or back panels.

Advantages of solid wood particle board:

One. The inside of the solid wood particle board is a granular structure of cross and staggered structure. Therefore, the nail holding force is good, and round nails and screws can be nailed. These machinability properties are significantly better than MDF.

Two. The density of solid wood particle board is higher, the wood fiber particles in the board are larger, and the essence of natural wood is more retained, and the content of solid wood particle board is generally less than 5% in the use of adhesive, and the environmental protection is better.

Three. Solid wood particle board has small warpage and deformation, good dimensional stability, high strength, good stiffness, and is not easy to bend when hanging heavy clothes. At present, the wood-based panels used in the European furniture market are mainly solid wood particle boards.

Which is better, MDF or solid wood particle board

The biggest advantage of using solid wood particle board is: environmental protection (less glue use, raw material is log fiber), moisture-proof and not easy to deform (it is particularly important for the humid weather in the south), strong bearing capacity (the internal structure is staggered and tight), strong nail holding force (if the screw is loosened after screwing, the MDF is difficult to fix due to the low strength of the MDF), which is also the reason why most businesses use solid wood particle board.

Through the introduction of MDF and solid wood particle board, we not only know what is called MDF, but also know what is called solid wood particle board, and of course, the advantages of MDF and the advantages of solid wood particle board also have an understanding. From the professional point of view of decoration, solid wood particle board is better than MDF, and the strength of solid wood particle board is higher, so that the furniture processed with solid wood particle board has a longer service life.

Whether the wardrobe is better MDF or solid wood particle board, combining solid wood particle board and MDF, each with its own strengths, is the best choice.

1. Nail holding force and load-bearing:

MDF is to grind logs into fibers, and the log structure is seriously damaged; Whereas solid wood particle board is made of crushed logs.

Pellets, the log structure is less damaged, which shows that solid wood particle board has stronger bearing capacity than MDF. Solid wood particle board is 5 layers of solid wood particles with fine to coarse layers stacked in an orderly manner, just like the principle of building bricks in a house, with tension and support for each other.

2. Environmental protection:

First, the glue used in the production process of the two is the same, but because the MDF is fibrous, usually in the amount of adhesive, the amount of glue used in the MDF is 5% more than that of solid wood particle board;

Second, when making fiberboard, the process is not allowed to undergo dehydration treatment, and the solid wood particle board must be dehydrated when pressing, and most of the formaldehyde will be chemically reacted in the process of dehydration, leaving only a small part of free formaldehyde. Comparatively speaking, solid wood particle board is more environmentally friendly.

3. Moisture-proof, because the glue content of the MDF is high, the internal space structure is less, so the moisture-proof is poor, put a solid wood particle board and a piece of MDF into the water at the same time, after 24 hours, it can be clearly found that the MDF is warped and raised around, and the solid wood particle board is unharmed.

4. Plasticity, because the MDF is fibrous, it is conducive to the machine to do carving, molding, arc and other shapes, which is the reason why the molded door panels and European lines on the market are MDF. The substrate of solid wood particle board is granular, so it is not easy to carve and mold.

To sum up, solid wood particle board is more suitable for cabinet substrate, while MDF can be used for back panels, door panels and line modeling. Only by combining solid wood particle board and MDF, each with its own strengths, is the best choice.

Second, when making fiberboard, the process is not allowed to undergo dehydration treatment, and the solid wood particle board must be dehydrated when pressing, and most of the formaldehyde will be chemically reacted in the process of dehydration, leaving only a small part of free formaldehyde. Comparatively speaking, solid wood particle board is more environmentally friendly.

It is recommended that the pellet version is a little better.

The back board uses MDF, and the laminate uses solid wood particle board, which can not only take advantage of the good flatness of MDF, but also make use of the environmental protection advantages of solid wood particle board, which can create an environmentally friendly living environment to the greatest extent. Let me explain the advantages and disadvantages of the two types of boards.

MDF is also known as MDF, which is a kind of man-made board made of wood fiber or other plant fibers as raw materials, crushed, fiber separation, and dried with urea-formaldehyde resin or other applicable adhesives, and then hot-pressed.

Advantages: The material is relatively fine, and the edge of the cutting surface will be sealed well, so that it is not easy to open the glue. It is easy to press into various shapes and make shapes, so there are usually more door panels or back panels.

Disadvantages: Because the substrate is powdered as raw materials, more glue is used than particle board, which is more likely to cause environmental problems. Secondly, due to the glue content of the MDF, the internal structure space is less, and the moisture resistance is poor, a piece of density is soaked in water for 24 hours, and it is obvious that the four sides of the MDF are raised and deformed after more than ten hours.

In addition, solid wood particle board is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. The principle is the same as that of MDF.

Advantages: 1) The inside of the solid wood particle board is a granular structure with a cross and staggered structure. Therefore, the nail holding force is good, and round nails and screws can be nailed. These machinability properties are significantly better than MDF.

2) The density of solid wood particle board is higher, the wood fiber particles in the board are larger, and the essence of natural wood is more retained, and the content of solid wood particle board is generally less than 5% in the use of adhesive, which is more environmentally friendly.

3) Solid wood particle board has small warpage and deformation, good dimensional stability, high strength, good stiffness, and is not easy to bend when hanging heavy clothes. At present, the wood-based panels used in the European furniture market are mainly solid wood particle boards.

Disadvantages: The flatness of solid wood particle board is not as good as that of MDF, and it is more difficult to do curvature and modeling.

At present, in the European market, for the sake of environmental protection, it is basically based on solid wood particle board, and most of the domestic manufacturers also use solid wood particle board as the base material of the cabinet.

From the perspective of environmental performance, we always enter a misunderstanding, which wood is big, which is environmentally friendly. This is a fundamental mistake, all the boards are made of wood, no matter how big or small he is, they are all made of wood, and the formaldehyde content of the wood itself is about milligrams, and the remaining formaldehyde is actually produced by the glue of the sticky board and the process control of the production process (including logs), then, what kind of glued board or what process is actually the key to determining the environmental protection of the board.

Now there are urine aldehyde glue, triammonia glue and MDI glue, and even MDI glue does not contain formaldehyde, so the formaldehyde content in the glue determines the environmental protection of this board, and it has little to do with the type of board and the size of the wooden strip.

Particle board and MDF are environmental protection industries encouraged by the state, and they are also commonly used furniture boards in developed countries.

The investment threshold is also relatively high, so there are some well-known large plate enterprises, and the environmental protection indicators of these large enterprises are very stable, for large furniture brands, this is the core purchase index.

Solid wood particle board is particleboard, I personally think that solid wood particle board is better, solid wood particle board is made of some good solid wood material head into particles, MDF is actually MDF, the manufacturing process is to beat the plant into fiber, powder shape. Of course there are many adhesives for powder, too. And solid wood pellets are better than MDF nails.

The high-density board on the market is actually medium-density board, the so-called solid wood particle board is particleboard, the flatness of the MDF is higher, the particleboard holds nails better, and the overall is about the same, but the price of MDF is higher than that of particleboard, and it is recommended to use particleboard.

MDF is much better than solid wood particle board in the wardrobe, because whether it is flatness, bearing capacity, or deformation resistance, it is better than solid wood particle board! Therefore, the price of MDF is much higher than that of solid wood particle board. The wardrobe should first be made high, resistant to deformation, and have a long service life.

It's better to use MDF for your wardrobe!

It is recommended to use solid wood particle board, because the solid wood particle board has good moisture-proof performance, is not easy to change, and has a strong load-bearing, do you want your clothes at home to be as heavy as the cabinet marble countertop!? In addition, the amount of glue used in solid wood particle board is only 5%, which is much more environmentally friendly than that of MDF. At present, many wardrobes and cabinets in the world are made of solid wood particle board.

Originally, the custom furniture concept of the Chinese market was to learn from the foreign market, but it was a little bit of a change of taste.

Hello, I am in the wardrobe industry, as far as I know, now the world's first-class furniture is made of MDF, MDF bearing capacity is better than particleboard, particleboard is mainly used for cabinets, moisture-proof good, but used for wardrobes are easy to deform.

Although the cost of MDF is a little higher than that of particleboard, it has a long service life.

If you have a lot of funds, you can make solid wood.

In ordinary life, the wardrobe at home can not only be used to store clothes and other objects, but also to decorate the home environment, which is an indispensable furniture for every family. Compared with the finished wardrobe, the custom wardrobe can customize the appearance and interior at will, which is more in line with the trend of pursuing personalization, and also makes full use of the residential space where every inch of land is valuable. Today, Xuebao Plate will introduce to you the types of wardrobe plates and which wardrobe plates are good.

1. Particleboard.

Particleboard is made from wood or other crops, which are broken into particles of a certain specification and bonded and pressed. This structure makes the toughness quite high, second only to MDF. There is also a kind of Ousong board, the chips are arranged in a directional manner, the mechanical properties are better, and the price is relatively much higher.

The surface is uneven, and professional equipment is required to process the milling shape, which is not suitable for modeling, so it is often used in wardrobes.

2. Multi-layer boards.

Through multi-layer solid wood veneer according to the direction of the wood grain perpendicular to each other, it is also called fine core board and rubber plywood. The advantage is that it is not easy to deform, has good moisture-proof performance, and generally speaking, the performance is better than that of particle board.

3. Woodworking board.

Woodworking boards are also multi-layer boards in nature, also known as large core boards. The inner core is a number of wooden squares closely arranged, and the surface is covered by two sanded solid wood sheets, common woods such as fir wood, poplar, Malacca and other fast-growing woods.

4. MDF.

It is a board that is hot-pressed and formed by breaking various wood raw materials during processing and then re-bonding, and has a high density. The surface of MDF is flat and easy to process and shape, but the nail holding force is poor, and the structural strength is limited, which is not suitable for long-term load-bearing, so it is often used as the base material for cabinet doors.

5. Fir plank.

Fir board is a kind of laminated timber, the core layer is made of fir as the base material, and a number of small pieces are spliced into a board with a larger width and thickness by tenon jointing process, and the amount of viscose used inside is low, which is one of the most environmentally friendly decorative boards for interior decoration. The base material of Xuebao ecological board is made of Lingnan high-quality fragrant fir wood, and the inner core of the tooth joint is matched with formaldehyde-free soybean glue, which has a high environmental protection level, and is more ecological and environmentally friendly as a bedroom wardrobe material.