-
Anonymous users2024-01-23It is recommended to remove and replace the aluminum gusset ceiling, the bathroom is too humid.
-
Anonymous users2024-01-22It is best to replace the aluminum gusset ceiling, if you don't want to change, stick it to the crack with caulking tape, and check whether the gypsum board is flat, whether the lap is neat, and then change the gypsum board, check whether the suspension bar and the main keel and the sub-keel lap are tight, and finally hang the putty, and then brush a little better waterproof latex paint, it must be waterproof!
-
Anonymous users2024-01-21The roof perimeter grille or four corners are uneven, or the moisture content of the wood is large and shrinks and deforms, which can cause uneven camber; In addition, the keel joint is uneven and hard bending, and the spacing of the boom or hanging bar is too much to cause the keel to deform, which will also cause the uneven ceiling; The top of the wooden boom is split, and the steel bar is not tightened when the boom is used, which will cause irregular wave deformation; To solve this problem, the only way to solve this problem is to remove the ceiling and redo it, otherwise, not only can it not be repaired now, but it will continue to develop in the future. It is recommended that the ceiling keel be made of light steel keel, it will not be deformed.
-
Anonymous users2024-01-20The ceiling is not waterproofed, and the bathroom humidity is generally used integrated ceiling, so even if it is repaired now, it will be broken again, in short, remove and replace.
1. Putty fills and brushes latex paint.
First of all, we use caulking putty to fill the gaps, and fill the gaps in the gypsum board ceiling; >>>More
Here's how to fix it:
1. Laying direction, transverse and longitudinal fixation, the strength performance and deformation of gypsum board are determined according to the direction, the longitudinal performance of the board is superior to the transverse, so the ceiling is not allowed to be parallel to the longitudinal and overlying keel, should be perpendicular to the keel, gypsum board must be installed in a stress-free state, the installation of the ceiling board is temporarily supported by wooden support, and the board is pressed with the skeleton, the support can be revoked only after the screw is fixed, and when the fixed plate is installed, it is fixed from the middle of the board to the four sides, and no more points are allowed to work at the same time. >>>More
It is understood that many owners like to use gypsum board to decorate when making ceilings, which is both good-looking and easy to construct, but gypsum board ceilings have a fatal shortcoming, that is, they are easy to crack. So what should I do if there are cracks in the gypsum board ceiling in the living room? Let's take a look! >>>More
Gypsum board ceiling selection materials, exquisite workmanship, high stability, void joints do a good job is not to appear expansion problems, Sumei Jijia decoration of gypsum board ceiling using non-toxic and non-radiation: KNAUF gypsum board uses corn starch as a binder, non-toxic, harmless, no skin allergies, does not release any radioactive harmful substances, and meets the national class A building materials radionuclide limit requirements.
Methods of repairing cracks in drywall:
Remove the loose plaster with a multifunctional knife. Turn the knife so that the notch is larger and the lines of the edges are clearer. Remove the plaster fragments and keep the wall around the notch structurally intact. Vacuum away loose plaster and dust. >>>More