Which furniture panels are suitable for painting and veneering? Thank you

Painting and veneer are two different concepts. There are also many ways, the surface of the board suitable for painting should be compact, and there can be no powder falling off, the effect of painting solid wood board and multi-layer plywood with tight skin is better, and the surface particles such as MDF, that is, fiberboard and particleboard, are not compact enough, and it is easy to fall off when damp for a long time.

There are many ways to veneer, there are direct PVC, melamine, ordinary artificial wood grain paper, high-gloss lamination, straight paste pattern fireproof board, etc., PVC is PVC mold paper directly cold pressed on a variety of boards, the effect is very good, but the wood texture is poor, easy to open the glue deformation, looks like a plastic board, do not want to wood board, ordinary artificial wood grain paper is with a wooden pattern pasted on the furniture brushed with solid wood or board, easy to use, convenient and simple. But the texture is poor, not environmentally friendly, the smell is larger, but also easy to peel off the skin and open the glue, melamine is a pattern of paper brush on the melamine glue, directly pasted on the board by high temperature and high pressure, the cardboard has a good degree of bonding, boiling water is not easy to open the glue, the color is smooth and bright, the pattern can be replaced as needed, because the surface has a completely solidified melamine glue, the amount of formaldehyde released is also small, it is good to make furniture.

High-gloss laminating film is somewhat similar to melamine, and it is similar to cold-pasted PVC, this kind of board is mostly used for building templates, less used as furniture, and there is a kind of fireproof board with patterns directly pasted on all kinds of boards, such as MDF particleboard, multi-layer board, etc., the effect is high, the color is also better, but the defective rate is higher, the board is not well fitted, it is easy to open the glue, and the sawing edge is easy to break, therefore, according to the production quality of the board, and the cost is comprehensive, the board suitable for painting is, solid wood board, blockboard, High-quality multi-layer plywood, aluminum-plastic panels, etc., which are suitable for cold-pasted PVC, are: medium and high density boards, particleboard, multi-layer boards, woodworking boards, etc. Suitable for hot-pressed melamine are:

MDF, high-grade multi-layer plywood, high-grade blockboard. Suitable for lamination: ordinary multi-layer board, MDF, particleboard.

Suitable for sticking artificial paper: ordinary solid wood boards, smooth multi-layer boards, blockboards. The fireproof board is pasted:

MDF, particleboard, etc.

If you make furniture, you need to use different panels according to the type and purpose of the furniture.

Nine centimeters, because he has a texture can also be sprayed, and the effect is very good.

Now there is an eco-paint-free board. You can take a look. It's good to make furniture. Relatively environmentally friendly.

Generally, people use solid wood planks to do spray painting, mainly to the grain of solid wood, commonly used fir wood, pine sylvestris, rubber wood, etc. The basic veneer can be.